Mastering the Datum: How to Add & Edit Project Global Levels in Advance Steel
Take control of your project base points and ensure accurate elevation references in every model. Working with the correct global datum level is essential for maintaining consistent elevations...
If you know the name of a part in your Advance Steel model, you can locate it in seconds. Here’s how: 1️⃣ Go to the Home tab on the ribbon.2️⃣ Open the...
So there I was, all fired up for my very first real plasma table job. Someone trusted me to cut 4 sheets of 5'x10' steel, each stacked with 84 plates (with slotted holes,...
How Buildings Are Classified (And Why It Matters to You) Did you know that buildings are grouped into different categories based on how risky it would be if something went wrong...
Just getting started with your CNC plasma table? No worries! This guide is here to help you cut steel plates using a machine like the STV Plasma Table and Optimum CNC software. We’ll break it down...
To start cutting the plates on the plasma CNC table, you must set up Advance Steel for export. The file must be extracted from the 3D model and converted into a flat 2D drawing. To...
