If you need to make a sketch on the sloping plane and control it using Variable Parameter in Autodesk Inventor, below you will find a simple procedure for it.
Table of Contents:
![ADDING A VARIABLE AND CREATING A SLOPING PLANE -](https://gomeasure4me.com/wp-content/uploads/2022/03/ADDING-A-VARIABLE-AND-CREATING-A-SLOPING-PLANE-.jpg)
Adding a Variable Parameter
- Make a new Parameter by clicking fx icon:
![](https://gomeasure4me.com/wp-content/uploads/2022/03/Make-a-new-Parameter-by-clicking-fx-icon.jpg)
- Click Add Numeric:
![](https://gomeasure4me.com/wp-content/uploads/2022/03/Add-Numeric.jpg)
- Enter a new name: SLOPE, change units to deg, enter a new value for the slope:
![](https://gomeasure4me.com/wp-content/uploads/2022/03/SLOPE-change-units-to-deg.jpg)
Making a Sloping Plane
- Pick an Axis and plane to slope:
![](https://gomeasure4me.com/wp-content/uploads/2022/03/Pick-an-Axis-and-plane-to-slope.jpg)
- Enter a value for slope – can be a numeric value or variable e.g. SLOPE:
![](https://gomeasure4me.com/wp-content/uploads/2022/03/Enter-a-value-for-slope-–-can-be-a-numeric-value-or-variable-e.g.-SLOPE.jpg)
- The Preview of the angle will be visible:
![](https://gomeasure4me.com/wp-content/uploads/2022/03/The-Preview-of-the-angle-will-be-visible.jpg)
- Rename your Sloping Plane by typing the new name:
![](https://gomeasure4me.com/wp-content/uploads/2022/03/Rename-your-Sloping-Plane-by-typing-new-name.jpg)
- Go to the Elevation View to check if everything is correct:
![](https://gomeasure4me.com/wp-content/uploads/2022/03/Go-to-the-Elevation-View-to-check-if-everything-is-correct.jpg)